How To Get Rid Of Squeaky Floors

By Subodh / April 8, 2011

Squeaky floors can be very annoying. They can also be dangerous. Squeaky floors can feature panels that are more likely to be weak or damaged. There is even the potential that a floor could end up being broken due to individual panels becoming weak.

Squeaky floors are often caused by things that relate to wooden floors dealing with too much fatigue from all of the weight placed on people who go on different panels. Nails can also become loose over time. This could cause the panels to squeak.

Floor joists can also shrink. This is from the friction placed on them and also from constant temperature and pressure changes.

Panels can also develop pressure when they rub against one another. There is even the potential for your boards to warp.

There are a few things that can be done to fix problems that relate to squeaks. These could work if you are careful with them.

Support Points to Review

You should take a look at how you are controlling supports in your floor. Screws should be removed and replaced or reinforced. This can work if the nails in your floor are loose. This is especially essential because these nails can be harmful if you step on them.

Also, you should check on your joists. A joist should be repaired or replaced if it is damaged. You might need to contact a professional to take care of this for you. Joists will need to be handled by getting your entire floor opened up.

Individual boards might also need to be replaced. This is the case if they have been worn out or they are warped. This could be the last option to use with regards to the support around your home.

Lubricants and Varnishes Work

You can use a lubricant or a varnish on your boards too. This can work in that you will need to add a lubricant inside panels along with baby powder in some areas. Graphite powder may also be used if needed.

Varnish can also be added. Varnish that works to coat boards can help you to keep panels thick. This will help to ensure that they do not become loose. The flooring area will practically work with the same consistent build to help you with creating a smooth area that will be easier for you to work with. You will need to replace the boards that you are treating in the event that you need to get something handled