Normally, energy bills are extremely high, but lessening them doesn’t necessarily require spending a great deal of money on solar panels or other green energy gadgets. With a few easy tricks and small changes to the way you employ your devices, you can lower the price down. People living in larger apartments/houses in hotter areas of the country encounter energy bills that are normally soaring to the unexpected heights.
When you look at everything closely, you will discover that every minute thing that might lower the bills cost money. Energy-conserving outlets cost a lot and solar panels are not cheap either. You not only need to measure your energy costs, but also have to considerably reduce the usage of computers, air conditioners, and other appliances. Here are a few ways you can employ to get reduce your energy bills significantly:
1. Heat and Air Conditioning
Do you live with warm weather conditions all year around? Your air-conditioning utilization is most likely to account for most of your bills. On the other hand, people living in colder areas use heating system frequently which is what costs them the most. In any case, you have to use your thermostat more effectively and efficiently.
Keep the Vents Clean and open
If you are using a central heating or air conditioning system in your house, check the vents regularly. Some of them might be closed. Most people do not realize that the vents might be closed since they think if they didn’t do it, it can’t happen on its own. They just assume the cents are open. This is in fact the biggest mistake made commonly by people. Some might suppose that closing vents reduces energy consumption, which is just a myth.
All the vents contain air filters that keep dust, dirt and other unwanted things out of your house. These filters must be replaced every month. It is best to buy these filters in bulk, which will cost you only 1-2 USD per filter. Determine the vents’ size prior to shopping.
Promote Improved Airflow in Your House
Maintaining an accurate temperature in your house often needs a lot more than decent airflow. Central heating can really struggle keeping every room at the same temperature, unless you have a small living place. When the weather is hot, the heat escapes via your home’s higher parts, e.g. another floor or ceiling.
You need to help the heat out faster by forcing the air upwards. On the other hand, you’ll need to stop the heat to escape and pull it back down when the weather is cold. Fans can be used to achieve both these tasks.
Fans consume considerably less energy than the air conditioners. Although they do not heat or cool the air, they can move it around. Circulating the air properly enables you to maintain a stable temperature throughout your house.
2. Laundry Machines
It is not difficult to cut costs on laundry. Simply use suitable amount of heat when needed, tackle the chore at night and pack the precise amount of clothes into the machine.
The LG electronics, a leading manufacturer of driers and washers, indicated that heating the water within the wash drum uses approximately 90 percent of the total energy utilized by the machine. Washing clothes with cold water will reduce energy costs to a great extent. On top of lowering your energy bills, using cold water reduces the work you need to do.
Monitor the Laundry Loads
Ideally, a single laundry load must pack in the maximum possible amount f clothing, but stuffing washer to the fullest is not a good idea either. While your washer can possibly fit whatever you put into it, you have to keep the capacity of the drier in mind.
If there is not enough room for clothes to move properly in the drier, you will need to run it twice, which is not an energy-efficient approach. Ideally, you should leave at least 25 percent of your drier unfilled to give clothing room for movement.
Carry out Your Laundry at night
Many power companies offer discount during the non-peak hours. The time and hours might vary according to your location. Shifting part of your energy use to that time will certainly save you a great deal of money. Call you power company today and ask about the non-peak discounts!
You can reduce your daily energy consumption by using the same tactics for dishwashers. Primarily, it indicates that you have to reduce the heat you utilize and load the dishwasher as resourcefully as possible.
Trim down the Heat
Normally, dishwashers need a small amount of heat to perform the job. Cleaning the dishes sometimes require hot water. On the other hand, drying the dishes doesn’t. Most dishwashers employ heated method for drying that can easily be disabled. Heated drying might help eliminate water spots on the dishes, but you can get the same results with rinsing agents, such as Jet Dry.
Load the Dishwasher Effectively
While you can easily stuff all your clothes in the laundry and call it a day, machines used to dish washing require a lot more care. Proper pre-washing plays a very important role. Each rack in a dishwasher offers you a specific advantage.
You don’t need to remove all the food from your dishes during pre-washing. Just remove the food and let the machine clear the residue left on the dishes. If you want to clear your dishes some more, go for it, but don’t waste too much water.
Where you place the dished in a dishwasher matters a lot. The bottom rack is ideal for plates. Make sure that the plates are facing the center of the machine. Utensils go in the carriage dedicated to them at the bottom. Place every piece properly and let the machine do its work.
When you are dealing with flat and large objects, avoid placing them parallel and close to the door of the dishwasher, since it might stop the detergent flap from opening fully. This will prevent the machine from cleaning your dishes properly, resulting in the need to run the dishwasher load again, which is two times the power consumption. Finally, use good detergents!
Using the tips mentioned above will not only cut the power bills, but will also help you preserve the environment!