How To Fix Cracks And Potholes In The Driveway

The driveway is one of the things that homeowners usually take for granted until something goes wrong. Unfortunately, cracks and potholes in your driveway are huge inconveniences. These two common driveway problems also reduce your home’s value, can lead to injuries, and damage your car. Listed below are a few tips for fixing cracks and potholes in your driveway. It is best to address these problems during the Fall season before the colder months arrive and do more damage to your driveway.

Cracks

The most common paving materials used for driveways are asphalt and concrete. These materials can develop cracks in the long run due to the harsh elements, as well as wear and tear. If you find any cracks in your driveway now, the rain or snow during the winter season will cause the cracks to get worse. Keep in mind that the moisture that seeps into the cracks can freeze and will put pressure on the driveway, which will worsen the damage. This problem may result in bigger problems, such as potholes or crumbling. Examine your driveway early in the year and repair any cracks before they get worse.

Fix Cracks And Potholes In The Driveway

Crack Repair For Asphalt Driveway: Most cracks in asphalt driveways can be repaired easily. For small cracks, which are around 1/8 to ½ inch, you should use rubberized asphalt emulsion type crack filler. Use a caulking gun to apply this type of crack filler. You can also pour it onto the crack and smooth the filler using a knife. Avoid getting the filler on the driveway surface.

Sealing The Cracks On Concrete Driveway: The first thing you need to do is clean the driveway thoroughly. You can use a knife or a screw driver to remove any loose concrete from the crack to completely clean it. Wash the area using water and detergent. After cleaning the driveway, apply concrete sealers. For large cracks, you can use a mixture of concrete and grout. According to http://www.kloepfer.com/, an Idaho-based construction company, it is best to use high quality concrete because it provides optimal performance. After filling the crack, apply adhesive to provide a stronger seal for the driveway.

Potholes

Whether your driveway is made of asphalt or gravel, potholes might start to develop. Potholes are very unattractive, can damage your car’s suspension, and can lead to injuries, such as a sprained ankle. Driveways made of gravel are especially susceptible to this common driveway problem because certain elements, such as water and weather, can shift gravel and dirt.

Concrete: Potholes in a concrete driveway is very hard to repair. If the problem is small, you can easily add concrete to fill the hole.

Asphalt: To deal with potholes in an asphalt driveway, you need to clean any loose asphalt in the hole. It is important to get rid of all loose gravel or the repair won’t turn out good. Once you finished cleaning the pothole, you should spray it with water. Don’t soak the hole, but get it wet enough to settle the dust. Fill the hole with asphalt cold patch to about half an inch above the surface. Use a tamping tool to tamp the patch down. It is crucial to compress the asphalt cold patch or it will quickly deteriorate. After this is done, you should put in some sand and sweep some dust over the patch.

Gravel: Just like how you would repair potholes in an asphalt driveway, you also need to get rid of any loose stones, gravel, or soil from the pothole. After doing so, fill the pothole with coarse gravel to about three inches beneath the level of the driveway surface. Tamp down the coarse gravel. The last three inches should be filled with the same kind of gravel used in the rest of the driveway. Rake the gravel so that it blends in with the rest of the surface.

Once these two common driveway problems are repaired, it is best to maintain your driveway regularly to keep it in its best shape. For one, seal coating your driveway can keep it looking beautiful and can prevent cracks.